Eliminates & Consolidates four (4) systems into One!(Oscilloscopes, Switch boxes, Cable adapters, T1 Test Sets)

•  Verify Both CC & T1 clocks 
•  Verify both Tip & Ring Individually 
•  FREQ, Voltages, Phase 
•  Integral DS1, DS3 Test  
•  Auto Fault Detection 
•  Auto 10-channel test 

Automated TSG Timing analysis System...
Three or Four systems in One: TSG Breakout box, O’Scope & T1 test set  & DS3 Test set!

Simplify and Automate TSG output verification tests. Tests TIP & RING independently, verifies Frequency, Voltages and Phase.

Auto 10-channel scan test, Auto fault detection: No Clock, No TIP, No RING, No 8k (BPV’s), CC or T1 signal. Test & Verify Tip-to-Ring and Tip-to-Reference.

T1 Signals routed to Comprehensive T1 test set for signal verification and Slips.

Comprehensive Automatic Composite Clock Analysis & T1 Clock verification

Composite Clock & T1
Tip-Ring & Tip-Reference
TERM & Bridged Modes
CC Signal Measurements
   ....Frequency (CC & Auto-T1) 
   ....Phase 0-360 degree’s 
   ....TIP Vpp, +Vpk and –Vpk 
   ....RING Vpp, +Vpk and –Vpk

Auto-FAULT Detection: 
   ....No Clock Detected 
   ....Missing or Open TIP 
   ....Missing or Open RING 
   ....T1 on TIP 
   ....T1 on RING 
   ....T1 on Tip & Ring 
   ....No 8k (BPV’s) on TIP 
   ....No 8k (BPV’s) on RING 
   ....No REF detected 
   ....Missing or Open REF 
   ....No 8k (BPV’s) on REF

Auto OUT-of-RANGE: 
   ....Frequency Out of Range 
   ....Voltage Out of Range 
   ....Phase Out of Range

Auto10-Channel Scan  (Test multiple TSG outputs in seconds) 
Built-in User Guide